Thyroid Test Recommendations And Ranges
Tests Recommended For Diagnosing Thyroid Dysfunction
Print The List And Take It To Your Doctor
If your Doctor Will Not Order All The Tests You Need For Properly Diagnosing The Health Of Your Thyroid Function, You Can Run Them Yourself, Without Your Doctors Script Or Approval.
Click On This Link For More Information: MyThyroidTests
**Thyroid tests should be run in the morning by or before 10:00AM.**
**If you are taking thyroid medication, do not take it the morning of your blood draw.**
Ranges are "Optimal". These are the Values You Should Be Working Toward. If Your Doctor Tells You Your Values Are Normal And Sends You On Your Way, It's Time For A New Doctor!!!
24 Hour Iodine Loading Test:
This test will evaluate whole body sufficiency for iodine. It compares the amount of iodine taken to the amount excreted in urine after taking a 50mg tablet of Iodoral. ** The thinking is, for example, if you put 50mgs of iodine into your body and 45mgs comes out, you are probably pretty iodine sufficient. However, if you put 50mgs in and only 5mgs comes out, you are iodine deficient, as your body has absorbed and held onto most of the iodine you ingested from the tablet. We look for 90% sufficiency.
To Order This Test Click Here: https://healingsolutionshealth.com/collections/thyroid-and-adrenals/products/24-hour-iodine-loading-test-kit
Measures the amount of Thyroid Stimulating Hormone in your blood. Most MD’s will use this to determine whether you are hypothyroid, but the range is so broad, that you can be hypothyroid and have symptoms with a TSH in the normal range. The TSH should NOT be used to diagnose or dose hypothyroid. (TSH should be below 1, preferably 0. If your thyroid has been removed due to cancer, your TSH should be suppressed.)
HEALTHY TSH LEVEL: .1-1.5 mlU/l
Free T4( fT4):
Free meaning unbound, is what is bioavailable to your cells and tissues. Thyroxine or T4 is converted into active T3. A low level of this hormone indicates hypothyroid. (Free T4 should be mid range and above.)
HEALTHY FT4 LEVEL: 0.8-1.8 ng/dl
Free T3 (fT3):
Triiodothyronine or T3 is the active hormone. A low level of this hormone indicates hypothyroid. (Free T3 should be mid range and above. Many individuals feel best when it is closer to the top end of the range.)
HEALTHY FT3 LEVEL: 3.5-4.3 pg/ml
Reverse T3 (rT3):
Sometimes known as the ‘antithyroid,.’ It is the mirror image of T3, but goes into the receptors and blocks the thyroid effect. If your rT3 is high, you are likely suffering from hypothyroidism. Your rT3 should be lower than 15. The ratio of fT3 and rT3 is also important and should be 20 or higher. To figure out the ratio, divide fT3 by rT3. (Some individuals feel good with a higher rT3 when they are able to keep their fT3 at the higher end of the range and their fT4 at mid-range. But, for some, a high rT3 can cause problems.)
HEALTHY rT3 LEVEL: <15 ng/dl (preferably below 9)
T3/rT3 Ratio: Should Be >2
Antithyroid Peroxidase Antibodies: These are antibodies that attack the enzyme, thyroid peroxidase. The test will help to diagnose Hashimoto’s Disease, which causes hypothyroidism. (You can be hypo without having Hashi’s) .
HEALTHY LEVEL: IF YOUR RESULT IS ABOVE THE NORMAL RANGE, YOU PROBABLY HAVE HASHIMOTO'S.
Thyroglobulin is a protein present in the thyroid gland. It is needed to produce T3 and T4. This test also measures antibodies and will help to detect Hashimoto’s Disease.
HEALTHY LEVELS: >3 IU/ml OR <40 IU/ml
(Iron, Ferritin, Vitamin D and B-12 must be in optimal ranges for the body to tolerate and use thyroid hormone properly)
Is the major iron storage protein in our body. A ferritin level that is less than 50 could be causing you to have symptoms of hypothyroidism. (Ferritin levels should be between 70 and 90 minimum.) A high Ferritin level may mean inflammation. Hemochromatosis is a genetic condition where too much iron is absorbed by the body. If you have a high ferritin level, this test should be run.
HEALTHY LEVELS: BETWEEN 70-90 mg/dl
Percent % Iron Saturation:
Measures your serum iron divided by your TIBC. Women want to be close to 35% and men closer to 45%. Like all iron labs you should be off all iron for at least 12 hours before testing to see how your supplementation is doing, or up to 5 days to see what your natural levels are. % saturation can look falsely good or high if your TIBC is too low.
Measures how much iron is in your blood. (Higher is better)
HEALTHY LEVELS: AROUND 110
TIBC (Total Iron Binding Capacity):
This test will determine whether you have too much or too little iron in your blood.
HEALTHY LEVEL: SHOULD BE ABOUT 1/4TH ABOVE THE BOTTOM IN THE LAB RANGE.
Vitamin D3 (25 hydroxyvitamin D test/Storage hormone):
Measures the amount of Vitamin D. (Vitamin D levels should be above 50, preferably around 85. **WHEN STORAGE D IS LOW, IT COULD MEAN YOUR MAGNESIUM LEVEL IS TOO LOW.)
You Need Another Vitamin D test:
With the advent of genetic testing (see the MTHFR page on STTM), some people have discovered they have a Vitamin D25 Receptor Mutation, known as VDR BSM.
The VDR gene encodes your vitamin D receptor. If you have a mutation of this gene, it can influence the density of your bone minerals in a negative way, causing increased risk of osteoporosis or bone fractures. It might even contribute to hyperparathyroidism or Rickets Type II.
Folks with this mutation convert vitamin D to vitamin D1,25, the active form of Vitamin D, but their Total Vitamin D 25 (the 25-hydroxy vitamin D) may be low because it’s converting to the Vitamin D1,25. Unfortunately, doctors aren’t checking the Vitamin D1,25 levels, which has a short half life, and they and you need to.
If you have too much of the active Vitamin D1,25, there is a possibility that the thyroid hormone T3 may not get to your cells well from being blocked thanks to the high D1,25. Says the website gettingstrong.org: “The excess 1,25-D can cause problems with other secosteroid receptors in the body, such as the thyroid receptor”. But we need more information to confirm this…so don’t take it as gospel yet!!
Bottom line: it can be wise to check both D3 and D1,25.)
The test is, 1, 25 Hydroxy Hormone D Active (WHEN ACTIVE D IS HIGH IT MEANS CALCIUM IS ALSO HIGH, WHICH IS RISKY)
SHOULD BE NEAR THE TOP OF YOUR LAB RANGE, NOT BELOW 800. (Individuals who are MTHFR positive, generally have B12 levels in the thousands.)
RBC Folate (B9):
Also needed for the development of red blood cells.
This is a B Vitamin which can be low in hypothyroid patients. Folate is important for prenatal development, as well as your blood cell health. Folate works with B12 in the use and creation of proteins. It's folate that is needed instead of folic acid, especially if you have MTHFR.
HEALTHY LEVELS: 3-17. Optimal: Top third of your lab range and Higher if you are MTHFR positive.